Skip to main content
11 of 12
Reworked contents, added links.
mins
  • 80.9k
  • 30
  • 326
  • 473

The dorsal ridge housed avionics and HF antennas. From this document:

The most noticeable difference are the larger cockpit windows and the removal of the dorsal fin (the long fin on top of the fuselage), that housed avionics. The 6R's not built for United did have the dorsal fin, though.

This is a non metallic radome. It protects the antenna from aerodynamic effects, and from water and ice which damage antenna electromagnetic characteristics. Closer view:

enter image description here
Source

The HF antenna was required when using long range HF navigation (Loran) and HF communications, typically over oceans and large non populated areas.

These features were not useful when flying over populated land, where VHF aids and VHF communication were possible.

There is a list of C/N without the dorsal fin in this forum. When the antenna is not under a radome, it looks like this:

enter image description here
Source (simulator)

See also: What is this wire going from mid-fuselage to the tail on this 737?

HF antennas are horizontal because the HF ground stations use horizontal polarization. Progress in antenna design and receivers with increase sensibility allow for smaller antennas, that can afford to be vertical with some signal losses. Today HF antennas tend to be vertical and under a radome at the leading edge of the vertical stabilizer:

enter image description here
Source

Helicopters, civil and military still use long wire antennas as antenna rails when they need HF:

enter image description here
Source

See also: What is this pipe on the tail of this helicopter?

mins
  • 80.9k
  • 30
  • 326
  • 473