Timeline for In ARINC 429 where are the bits indicating the hex value of Equipment ID?
Current License: CC BY-SA 3.0
5 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Jul 10, 2017 at 21:20 | comment | added | nibbioreale | Your answer was a big clarification of my doubt. Thank you so much, I really appreciate it. | |
| Jul 10, 2017 at 0:42 | comment | added | Gerry | SDI - Source/Destination Identifier can be used to identify either the source or destination of multiple LRUs of the same type. Tuning controls will use it to select the destination LRU. e.g.; VOR is controlled with Label 034. SDI will indicate whether the tuning label is intended for the left or right VOR. With 3 IRS on board, they each use SDI to indicate which IRS the data originated from. This allows receiving LRUs to select a specific source IRS (Left, Center, Right) for their data. When LRUs are installed, discrete hardwired inputs set the LRU's position. | |
| Jul 9, 2017 at 16:03 | history | edited | mins | CC BY-SA 3.0 |
added 441 characters in body
|
| Jul 9, 2017 at 15:21 | history | edited | mins | CC BY-SA 3.0 |
added 3 characters in body
|
| Jul 9, 2017 at 15:12 | history | answered | mins | CC BY-SA 3.0 |