Questions tagged [wing]

The structures extending from the sides of the plane that generate most of the lift to keep the plane in the air.

Filter by
Sorted by
Tagged with
1
vote
2answers
169 views

Could a triplane fly using a dihedral wing in the middle?

I wonder if a triplane glider whose front view is shown in the figure can be built and flown successfully. As you can see, the middle wing has a dihedral angle, but the top and bottom wings do not. ...
0
votes
0answers
27 views

How to calculate the mass moment of inertia of a symmetric wing like NACA-0012?

I am working on the pitching mechanism of a NACA-0012 wing. I have the mass and found out the centre of mass of the wing but the software (OpenFOAM) needs more parameters such as the mass moment of ...
4
votes
2answers
2k views

Why are highly cambered airfoils rarely used in propellers or wings?

Highly cambered airfoils like the Seligs and Epplers are hardly ever used in propeller or wing sections. Why? Does their performance reduce at high Re? Are they only adequate at low Mach, low Re? ...
2
votes
1answer
152 views

why some airplanes have their exhaust gases vectored above the wing?

I was looking at images of the SkyCourier shown below and i have noticed the asymmetrical exhaust pipes in both engines (one pointing up and one is straight), doing my research on the internet, i ...
4
votes
1answer
620 views

Why do all fifth generation fighters (J20, F22, SU57) put their wing above the fuselage?

I heard that upper wing could increase stability, but why do fighters need it? Or are there some other reasons? Please specify.
1
vote
0answers
84 views

How do I reinforce a tubular spar that has been drilled vertically for an attachment bolt?

Previously posted a question about lift strut attachment to tubular wing spar with a bolt vertically through the spars. See drawing below. I tried using Bruhn's analysis book to formulate a a ...
4
votes
1answer
327 views

Why do all fifth generation fighters (J20, F22, SU57) use Trapezoid wings?

It seems that trapezoid wings are used by all fifth generation fighters (although the wing of J20 looks quite like delta wing), but why? What made a trapezoid wing so attractive? Why don't they use ...
4
votes
1answer
148 views

What's the wisdom of attaching an aircraft lift strut to a wing spar utilizing a single eye bolt vs the common two plate or strap method?

in the enclosed picture are three examples of types I'm speaking of. In the top picture, the lift struts are attached via a single eye bolt. The eye bolt is obviously vertical through the wingspar ...
2
votes
3answers
251 views

Why is a rectangular wing planform less efficient than others?

I read somewhere that a rectangular wing is inefficient compared to other wing planforms. Can someone clarify why this kind of wing planform is inefficient compared to other planforms and what causes ...
2
votes
3answers
191 views

Does the Prandtl flying wing have a lower maximum speed than other designs?

Does the design of the wing with its "twist" near the wingtips necessarily limit the maximum speed of an aircraft utilising that technology? Also, with the leading edge profile/attack angle varying ...
1
vote
1answer
157 views

Are there any NACA airfoils that resemble the X-29's wing?

As a part of my project, I am trying to perform structural and aerodynamic analysis of a forward swept wing on an aircraft, specifically the Grumman X-29 (pictured below). I am assuming that ...
3
votes
1answer
63 views

How to calculate bending moments and shear forces on a wing?

I am trying to create a MATLAB script to plot the Bending Moment Diagram (BMD) and Shear Force Diagram (SFD) as a function of spanwise distance, x, along a wing from the wing root (x=0) to the wingtip ...
2
votes
2answers
192 views

Elliptical wing planform and elliptical lift distribution

I know that there are similar topics already here, but after reading them I still do not understand everything. From what I know elliptical lift distribution gives the least amount of induced drag. ...
0
votes
0answers
36 views

What is the effect of wing flex on wing's airfoil shape and its performance effect on wing?

There are good amount of discussion on wing flex in this forum. I am more interested in understanding the effect of flex on aerofoil shape of the wing and its impact on flight performance. Do ...
1
vote
1answer
141 views

Airfoil and Wing Analysis for Transonic Speed (M = 0.85 and Re = 42 million)

I am working on a project where I have to design a plane which has to cruise at 0.85 Mach at 35,000 ft. While working on the wing design, I quickly discovered that 6 series airfoils, with a good ...
5
votes
4answers
1k views

Does the tailplane have a positive/negative camber?

I've read that the tailplane produces negative lift, so does that mean it would function like an inverted wing (has negative camber)? The image below is the best illustration I could come up with. ...
3
votes
1answer
198 views

Why were most of the first-generation-Learjet wing mods never approved for the Learjet 23?

First-generation (straight-wing1) Learjets (the 23, 24, 25, 35, and 36) are, rather infamously, beasts to fly, due in part to their hideous stall behaviour;2 due to their flow-separation-prone laminar-...
3
votes
1answer
88 views

When calculating the lift coefficient, what area is used?

Lets say I had this rectangular double curve wing. Orange represents the chord length, red represents the airfoil outline length below the chord line, green represents the airfoil outline length above ...
2
votes
1answer
194 views

If the modern airliner was redesigned from scratch, would it look functionally different? [duplicate]

If the modern airliner (Boeing/Airbus) was redesigned from scratch today without any need for "backward compatibility", would it look functionally different from the current design? And if so, what ...
3
votes
2answers
128 views

Why do airfoils in an airplane's wings have different shape and size along its span?

Why wings of an airplane consist of different shape and size of airfoil. What will happen if the thickness of wing are same throughout the wing?
1
vote
1answer
74 views

F4u race wing design [duplicate]

Can anyone suggest a good airfoil for racing the F4U Corsair? I'm building an RC model but I want it to be fast unlike scale warbird. Any suggestions on wing design and airfoil would be greatly ...
4
votes
6answers
6k views

Can a wing generate lift in excess of its aircraft's weight?

"For a plane or bird to fly, its wings must produce enough lift to equal its weight. " I got that excerpt from "https://www.sciencelearn.org.nz/resources/300-wings-and-lift". My questions: (1) Can ...
2
votes
1answer
127 views

Does turbulent flow encourage/avert flow separation?

I know that turbulent flow has more energy than laminar flow and hence can sustain adverse pressure gradient for a longer period of time. It basically delays flows separation. But referring to this ...
5
votes
1answer
256 views

What is the outer kink on the airbus 340-600?

I was checking some information about the a340-600 and got this statement: "thickness/ chord ratios 15.25 per cent at root, 11.27 per cent at inner kink, 9.86 per cent at outer kink and 10.60 per cent ...
12
votes
2answers
1k views

Can anyone explain the reflex wings used in powered paragliding?

There are some paramotoring wings presumably designed for higher speeds. The method is to allow a portion of the wing near trailing edge to flutter in high speed, rendering it unaccountable for ...
0
votes
1answer
91 views

Building optimal RC flying wing [closed]

I have an EMAX motor that operates at maximum efficiency generating 200g of thurst. This is the only fixed parameter I have. How do I find the most efficient wing design for this flying wing, ...
0
votes
0answers
47 views

Will this thick annular wing have a nose-up pitching moment in tilted forward flight?

As you know, a ducted fan/propeller (Figure C) has a strong tendency to pitch the nose-up during "tilted " forward flight due to the front part of ductlip itself generating more lift. Thus any ...
1
vote
3answers
210 views

What is the relationship between centre of gravity, centre of pressure and pitch?

Ok so I've got a couple of questions regarding CG, CP and pitch 1) When the aircraft is taking off, is the tail down force required to pitch up the aircraft high? Because the aircraft always has a ...
1
vote
1answer
105 views

How do the wings connect to the centre wing box?

First of all does the centre wing box form part of the fuselage as it's in the centre of the fuselage? Secondly how does the wing spars connect to this centre wing box to hold everything together?
4
votes
3answers
273 views

What effect does wing loading (high and low) have on aircraft performance?

I've read that stalling speed is partly determined by wing loading. Correct me of I'm wrong - "Aircraft with high loading have more weight relative to their wing area hence the stall speed is ...
2
votes
2answers
110 views

What are the handling effects of converting a dihedral wing to polyhedral?

I'm looking at plans to build a radio controlled (RC) glider that is launched by rocket boost mainly as a park flyer. I've been given a set of plans for a model that is a dihedral wing (see attached ...
1
vote
1answer
110 views

How do I choose the correct params?

I am very new to airplane design. I am working on this project to design a flying wing glider (no propeller) that would glide in a circular pattern with a fixed radius of 250 m after being released at ...
1
vote
1answer
64 views

What parameters to focus on when constructing a wing for turning? [closed]

I want to construct a flying wing (glider) with the sole purpose of performing a helical turn (or a circular turn with no propulsion attached) with somewhat of a fixed radius. What should be the main ...
4
votes
1answer
207 views

Is it coincidence that the B-2 and YB-49 flying wings have exactly the same wingspan?

Development of the Northrop Grumman B-2 Spirit began as far back as 1979; however, this was nearly thirty years after the last flight of Northrop's earlier flying wing the YB-49. There aren't many ...
0
votes
0answers
36 views

Where can I find data comparing coefficient of lift (and drag) curves for any airfoil with and without flaps deployed

I'm doing my masters thesis on a FISHBAC wing so I'm hoping to find coefficient of lift and drag curves for any airfoil with and without (any type of) flaps deployed (and preferably leading edge ...
4
votes
2answers
169 views

Why can't commercial aircraft have a wing boundary layer suction system?

I've read that NASA's boundary layer suction system on the wings can reduce drag by removing the boundary layer through the suction holes. If this can reduce a lot of drag (hence improving fuel ...
0
votes
0answers
40 views

Could box-wing aircrafts be the plane of the future [duplicate]

I've read that box-wing aircrafts can reduce wingtip vortices caused by induced drag hence saving up a lot of fuel and hence able to carry more passengers. Would we able to see such aircrafts in the ...
0
votes
0answers
98 views

Why don't commercial aircraft have variable sweep wings? [duplicate]

I was wondering why commercial aircraft don't have variable sweep wings just like the Bell X-5 did? By sweeping the wing further at high altitude it helps the aircraft move faster and also it helps ...
1
vote
0answers
104 views

Are there any lift or lift coefficient equations which factor in the flap deflection angle?

I'm asking this because I tested a NACA 2412 wing with an adjustable flap in a subsonic wind tunnel and I'm getting the lowest Cl values for the highest flap deflection angle.. which to my knowledge ...
1
vote
4answers
210 views

Why are early wing planforms mostly rectangular?

I am looking at the history of wing planforms, and I am having trouble finding reasons for why the wright flier and other early aircraft were built with rectangular wings. I thought it was due to ...
0
votes
0answers
31 views

Calculating Lift of a closed-wing drone

A group of students and I are designing a theoretical closed-wing drone and need to calculate lift based on the NASA lift equation. We've designed fixed-wing aircraft before and when it came to ...
5
votes
2answers
492 views

Why was the B-52's wet wing more susceptible to fatigue than its dry wing, and not less?

After years of carrying all its fuel in the fuselage, the B-52 transitioned to a wet wing (where the wing structure is used as one or more fuel tanks) with the B-52G. This caused severe problems with ...
3
votes
1answer
117 views

Why did this delta wing generate a lower Cl at a higher wind tunnel velocity?

I'm an aerospace engineering student,and just did an aerodynamics lab in which we measured the lift & drag of a delta airfoil inside a wind tunnel between 0 and 40 degrees, in 5 degree increments, ...
1
vote
1answer
110 views

Which type of fan is better for wind tunnel testing?

I would like to build a small wind tunnel to test a miniaturized wing/airplane. I have two options, using axial blower (picture 1) or using centrifugal blower (picture 2). The first will be the wind ...
6
votes
1answer
194 views

Do the F-18's leading edge flaps deflect symmetrically in rolls?

When the F-18 Hornet does rolls, do the Leading Edge Flaps (LEFs) deflect symmetrically or is the deflection different on the left and right LEFs?
0
votes
0answers
61 views

Wing fuselage joint in small aeroplanes [duplicate]

I know that there are bolts to connect the centre wing boxes of the fuselage and wings in large aircraft, but what are the methods of connecting the wings and fuselage of small aeroplanes? I’m mostly ...
0
votes
2answers
258 views

Is moving payload masses during flight to restore mass centering, or to avoid having to trim, a useful approach?

Note: Title was previously "Movable big missiles/bombs/tanks under fighter jets: conceivable?" Example: lateral weight distribution in fighters Fighter-bombers jets are small and lightweight in ...
4
votes
1answer
115 views

Is the “wing area” of a biplane the projected area or the total area?

When you specify the wing area of a biplane, do you specify the planform area (the projected area) or do you specify the effective area of both the wings?
20
votes
3answers
6k views

Why do non-aerobatic aircraft have a negative G limit?

Why do airplane wings have limit load of both positive and negative g's (e.g., the Weedhopper ultralight has a load factor of +5 and -2gs). Why not just have a positive limit load since most airplanes ...
14
votes
1answer
8k views

What is this hole on the left wing of the Eurofighter Typhoon?

I came across the picture below and saw the hole near the centerline on the left which appears to have some carbon next to it. What is its purpose and where does the carbon come from?

1
2 3 4 5
10