130 views

### How do I choose Cl during cruise flight with a given MTOM and variable S?

Currently I'm challenging myself to build an airplane from scratch. I have a background in aeronautical engineering but I have no experience in actually designing an aircraft from the ground up. (FYI: ...
1 vote
1k views

### Do wingtip vortices cause a decrease in the lift component of aerodynamic force, and do planes need to pull more AoA to compensate?

So, from what I know about wingtip vortices, they shift the angle of the relative airflow to where the effective angle of attack of the airfoil is lowered. Since the aerodynamic force is always ...
6k views

### Why is the coefficient of drag for straight wings at supersonic speeds lower than for swept wings?

Why is the coefficient of drag of a straight wing lower than the coefficient of drag of a swept back wing at higher supersonic speeds (above, say, Mach 2)?
343 views

### What is the validity of doing 2D airfoil simulation for axisymmetric bodies?

I am currently working on axisymmetric bodies like fuselages/droplets etc. For this, I am interested in the point of flow separation (if there is) and velocity components at a certain point in space. ...
89 views

### What are some features of a wing, which effects its lift coefficient other than its sectional view? [duplicate]

What geometrical features of a lifting surface apart from which airfoil it has, I mean the ones visible from the top and front view of a wing (for ex: its span, AR, sweep, dihedral etc.) effects its ...
784 views

### How much does the fuselage of an airplane contribute to yaw stabilization?

Obviously considering that (almost) every plane has a vertical stabilizer, probably not, but for a relatively long aircraft does the fuselage measurably contribute to the yaw stabilization relative to ...
8k views

### How does the angle of attack vary in turns?

I read somewhere that when the aircraft banks to turn, its angle of attack increases.Since angle of attack is the angle between the relative wind and chord line, how does turning increase it? Is it ...
1k views

### How does airfoil affect the coefficient of lift vs. AOA slope?

I'm trying to understand whether the airfoil shape can affect the slope of Cl vs. AOA (coefficient of lift vs. angle of attack) in the "linear" portion, e.g., from a few degrees negative to ...
2k views

### Is there a parameter that links the areas of the fuselage and control surfaces? [closed]

Do aircraft designers look at the ratio of how much fuselage surface area can be loaded onto a given unit of wing and tail surface area including elevator, aileron, rudder etc? (Possibly, the surfaces ...
2k views

### Why do delta wings generate less lift at a particular angle of attack compared to straight wings?

I simulated a delta wing and a straight wing in xflr5 with the same profile, wing area and airspeed (very low airspeed. around 10 m/s. it's for a model aircraft). The straight wing was operating at ...
10k views

### What is ground effect?

We've all heard the "acts like a cushion of air" explanation tossed casually around by CFIs. There's also plenty of books and reference materials that give a detailed, accurate, and complete ...
512 views

### What would be the power requirements and performance of a Scroggs-type delta-wing aircraft with a 250 cm span?

Roy Scroggs, a tailor, patented in 1917, US1250033, and in 1932 US1848578, a Delta Wing plan form machine 'Flying Dart', flight tested with an OX-5 engine, they say ...
3k views

### Why stall on 2D faster than 3D?

why cl on 2D is better than 3D. and why cl 2D stall faster than 3D? what happens when CP continues to move forward on the wing. and what happens when CP continues to move forward on the elevator.
1 vote
3k views

### How can I calculate CLmax for a wing with multiple airfoils?

How should I do the math to find the CLmax of a wing that has more than one airfoil, each with a different CLmax? I am trying to make a model with a portion of the wing tip with a airfoil that has a ...