I am reading this book: "Flight Stability and Automatic Control", second edition, Dr. Robert C. Nelson. In the chapter 2, page 42, the author wrote:

Note that the vehicle can be statically stable but dynamically unstable. Static stability, therefore, does not guarantee dynamic stability. However, for the vehicle to dynamically stable it must be statically stable.

I understand static stability, but I am not sure I understand dynamic stability. Can someone help me understand the above texts and give me an example of this case?


4 Answers 4


Static stability means that a deviation from a trimmed state produces forces which return the system to this trimmed state.

If these forces produce an overshoot which increases over time, such that the system oscillates around this trim point with increasing amplitude, the system is dynamically unstable. The long period oscillation (phygoid) of gliders is often unstable because their L/D is high enough to push them into unstable territory.

Dynamic stability means that the oscillations die down over time. Without static stability the system would simply leave the trimmed state without any tendency to return. This tendency to return is the prerequisite for the oscillation, whether stable or unstable.

  • $\begingroup$ +1 for the reference to L/D, I've often wondered whether when cloud-flying in a glider especially without artificial horizon, it would be helpful to lower the gear and possibly also crack the spoilers open a bit? Maybe make some sort of block or other mechanical aid to hold the spoilers slightly open without constantly occupying the pilot's left hand? (Just a theoretical question for me at present but I know in some other parts of the world cloud-flying in gliders is still somewhat routine...) $\endgroup$ Jan 7, 2021 at 14:43
  • 1
    $\begingroup$ That'll just make more noise as you become disoriented and go into a spiral dive past Vne, which is guaranteed if you don't have gyro instruments, and likely eventually even if u had an electric turn coordinator.If the glider has speed limiting dive brakes/spoilers, meaning the plane is incapable of exceeding Vne even straight down, and most modern glider do, your best bet is to just dump full spoilers and let it go and wait to come out of the bottom. If you try to maintain controlled flight in cloud for any length of time with spoilers in or partly out, you will come out the bottom in pieces. $\endgroup$
    – John K
    Jan 7, 2021 at 16:37
  • 1
    $\begingroup$ @JohnK -- no, partial-panel cloud flying in gliders has long been an accepted practice in some parts of the world, especially in Europe and England. Here's a traning document from an English gliding club -- dartmoorgliding.co.uk/Instrument_Flying_course_notes.pdf -- it has been updated to mention GPS, but the first 15 pages are all about how to control the glider using only turn rate indicator, ASI, and conventional magnetic compass. I've accumulated a library of over a dozen books on gliding from the 60's and 70's and most of them reference partial-panel cloud flying. $\endgroup$ Jan 8, 2021 at 13:10
  • 1
    $\begingroup$ @JohnK -- the only one I have handy right now is "New Soaring Pilot" by Ann and Lorne Welch and Frank Irving,3rd edition, 1977. Chapter 10, pp 120-139, is entitled "Instrument Flying", and is entirely about cloud flying. On p.136 there is a sentence beginning "Although blind flying is perfectly practical on a turn-and-slip indicator, it is made easier of the glider is equipped with an artificial horizon..." All preceding pages assume there is no artificial horizon, and there are plenty of references to flying in cumulus clouds, not just smooth mountain wave clouds. $\endgroup$ Jan 8, 2021 at 13:19
  • 1
    $\begingroup$ @ JohnK -- a friend of mind flew gliders in Holland and elsewhere in Europe in the (60's? 70's?) and accumulated many hours of soaring in cloud, w/o artificial horizon. I also know someone who, back in the '70s when the floor of controlled airspace may have been higher, set a state altitude record in a midwest flatland state in the US by thermalling up in a towering thermal cloud to something like 17,000' or more AGL. Again he had a turn rate indicator but no artificial horizon. $\endgroup$ Jan 8, 2021 at 13:22

If an aircraft is statically stable, it will always return to equilibrium after a disturbance. But what happens after can either show instability or stability. This is where the dynamic stability comes in.

You can think of an aircraft at equilibrium at a particular speed, altitude and angle of attack and it is suddenly faced with a disturbance which changes its speed, altitude and angle of attack. If the aircraft has static stability, it will immediately seek its equilibrium state. If the said aircraft is also dynamically stable, the amplitude of its motion will reduce with time. This is called subsidence. One of the major factors that affect dynamic stability is the amount of damping in the system. From now on we will consider the aircraft already is statically stable. When there is enough damping, an aircraft will slowly in time, reduce its amplitude until the amplitude goes to zero. Here the aircraft is said to be dynamically stable. If there is less damping the oscillations increases with time and the amplitude of motion also increases. This is called divergent oscillation. In this situation, the aircraft is said to be statically stable but dynamically unstable.

The aircraft has less dynamic stability at high altitudes where aerodynamic damping is lower. A pilot can also reduce the dynamic stability of the aircraft. If his/ her inputs are close to the natural frequency of the aircraft it can add energy to the system and the divergence increases. This is called Pilot induced oscillation (PIO).

enter image description here

Statically and dynamically stable.

enter image description here

Statically stable but dynamically unstable.

It is important to keep in mind that an aircraft, while it can be statically stable and dynamically unstable, it cannot be the other way around. That is, an aircraft can never be statically unstable and dynamically stable.

  • 3
    $\begingroup$ Possible improvement-- first sentence-- change "it will always return to equilibrium" to "it will always seek to return to equilibrium"... if it has truly returned to equilibrium then it will stay there till the next disturbance-- $\endgroup$ Jan 7, 2021 at 15:44
  • $\begingroup$ Would it be possible for an aircraft to settle into an oscillation which reaches a certain amplitude and then remains there? Would that be classified as dynamically stable or unstable? $\endgroup$
    – supercat
    Jan 7, 2021 at 20:47
  • $\begingroup$ @supercat not for control theory, however all material components have maximum deflections etc, and once those are reached the control system cannot react further. This might mean that a wing bends in such a shape that the dynamic stability is removed. Another reason might be that you have a secondary control system acting "over" the basic system: which adds stability but works at much lower frequency. But those effects are ignored when discussing stability of an aircraft: you just don't want these to happen or depend on them. $\endgroup$
    – paul23
    Jan 7, 2021 at 21:02
  • $\begingroup$ @paul23: In a system of linear differential equations, a system will either be overdamped, underdamped, or critically damped; even when flying within normal parameters, however, an airplane's behavior won't be perfectly modeled by a system of linear differential equation. Many real-world non-linear systems (including most purpose-designed oscillators) can oscillate with closed-loop gains that are greater than 1 for part of each cycle and less than one for other parts. $\endgroup$
    – supercat
    Jan 7, 2021 at 21:09
  • 1
    $\begingroup$ @supercat If the aircraft reaches a disturbance and stays at the point where the disturbance threw it to, the aircraft is said to be both statically and dynamically neutral. Airbus aircraft control laws are actually designed this way. It behaves as if it has neutral stability. Within the protection envelope if you make an input the aircraft remains there until the pilot brings in a change. $\endgroup$
    – Anas Maaz
    Jan 8, 2021 at 4:06

Lots of good information in answers posted so far but I think it is also useful to point out that with no static stability (in the pitch axis), the aircraft wouldn't be trimmable. With positive static stability (in the pitch axis), you can trim for a given airspeed, and if you then pull the stick aft, you'll feel an increasing forward pressure on the stick, and if you then release the stick, the nose will drop and the airspeed will increase. Likewise, if you trim for a given airspeed and then push the stick forward, you'll feel an increasing aft pressure on the stick, and if you then release the stick, the nose will rise and the airspeed will decrease. Static stability makes that possible.

But that's not sufficient to ensure that the aircraft will actually settle down at the trim airspeed after a disturbance, if you continue to exert no forward or aft pressure on the stick or yoke. As other answers have noted, if the aircraft is statically stable but dynamically unstable (in the pitch axis), after an initial disturbance, it can enter a pitch "phugoid" oscillation that keeps getting bigger, rather than damping out, unless the pilot intervenes. Here's a video showing such a thing.

It's worth noting that these effect can be subtle enough that a pilot can accumulate many hours of hands-on flight time in some particular aircraft, without actually having any idea whether it is dynamically stable or unstable in the hands-off case, in any given configuration.

  • $\begingroup$ why does that real airplane not have dynamic stability? I thought engineers would design an airplane that has ocsillation damped out? $\endgroup$
    – Dat
    Jan 8, 2021 at 4:19
  • $\begingroup$ @Dat -- it's a glider, and see the reference to gliders in other answer here aviation.stackexchange.com/a/83369/34686 $\endgroup$ Jan 8, 2021 at 13:48

Static stability is the initial response of a plane to an instant impulse (like a turbulence), while dynamic stability is how a plane responds over time to a disturbance.

Dynamic stability can be verified by pulling/pushing one flight control surface and instantly letting it go: oscillations on the related axis can increase in amplitude, decrease in amplitude or maintain the same amplitude.

If, over time, the plane is stable then, the initial response is stable, but you can't say the opposite.

I don't know to explain it mathematically (if it's what you are looking for).

References: https://www.boldmethod.com/learn-to-fly/aerodynamics/3-types-of-static-and-dynamic-stability-in-aircraft/


You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .