47
$\begingroup$

Why is a Boeing 737 NG engine not completely round in shape? It seems to be flat at the bottom and round at the top and sides. Earlier Boeing 737 versions (100 and 200) seem to have a more rounded shape.

Boeing 737
(Source)

$\endgroup$
  • 1
    $\begingroup$ Thanks to all of you who took time to clearly explain the reasons for the shape of the nacelle/engine in Boeing 737NG. Srikanth $\endgroup$ – Srikanth Jul 23 '14 at 14:26
39
$\begingroup$

The engine in question is a CFM56 turbofan engine which is larger than the JT8D the plane was originally designed for and thus has less ground clearance. This meant that they needed to flatten the bottom by moving the accessory gearbox to the side from the bottom and shrinking the fan.

To quote Wikipedia:

In the early 1980s Boeing selected the CFM56-3 to exclusively power the latest Boeing 737 variant, the 737-300. The 737 wings were closer to the ground than previous applications for the CFM56, necessitating several modifications to the engine. The fan diameter was reduced, which reduced the bypass ratio, and the engine accessory gearbox was moved from the bottom of the engine (the 6 o'clock position) to the 9 o'clock position, giving the engine nacelle its distinctive flat-bottomed shape. The overall thrust was also reduced, from 24,000 to 20,000 lbf (107 to 89 kN), mostly due to the reduction in bypass ratio.

They also mounted the engine in front of the wing rather than below to get every bit of clearance they could.

Front view Side View

$\endgroup$
  • 5
    $\begingroup$ I added three pictures, if you disagree with it, please feel free to remove $\endgroup$ – CGCampbell Jul 22 '14 at 14:49
  • 1
    $\begingroup$ the LEAP's fan blades are 173cm in diameter $\endgroup$ – shortstheory Jul 22 '14 at 16:06
  • 1
    $\begingroup$ Gotcha, sorry about that. I'm editing this answer to remove a rendering of the wrong aircraft/engine. $\endgroup$ – CGCampbell Jul 24 '14 at 17:46
  • 2
    $\begingroup$ To add, the slope visible on the left picture at the bottom of the nacelle is there to allow the aircraft to land on one rear wheel during, for example, a crosswind landing. $\endgroup$ – Brilsmurfffje Mar 8 '18 at 14:53
20
$\begingroup$

You are confusing the shape of the engine with the shape of the nacelle. Axial-compressor jet engines (standard on larger commercial jets) are invariably round and thin1. Engines with a centrifugal compressor are fatter in the middle and will occasionally be lumpy shapes depending on the internal airflow (some engines completely reverse the flow of air through them, sometimes several times2).

Positioning accessories like pumps, starters, generators, control boxes and minor things like mounting brackets are flexible. The engine manufacturer may dictate the position of some things like a gearbox, but if it attaches with a hose it can generally go anywhere the airframe designer wants to put it. The nacelle is then built to contain everything, not produce too much drag, not hit the ground, and preferably not cost too much to make. There's no reason we can't make hexagonal nacelles, we just choose not to.

  1. I consider the fan to be a bolt-on here, not part of the engine itself.
  2. See Pratt & Whitney PT-6 for an example.
$\endgroup$
5
$\begingroup$

This question seems to have been worked over pretty well. My only additional comment is some background on the engine itself. Think of the SNECMA CFM-56-3 Turbofan as two parts: 1) the core gas generator designed and built by GE, and 2) the Fan/Power Turbine designed in France and mated onto the GE core. The best part of the story (you will not find this in Wikipedia) is the Boeing redesign of the engine strut to allow this engine to be mounted in front of the wing as opposed to under the wing such as with the -100 and -200 installations.

Another point that seems to be missing is FOD. During turbine engine design, considerable time and money is invested in designing features that protect the turbo machinery from FOD (Foreign Object Damage). This engine, if it was any closer to the ground (such as during operation with a deflated landing gear strut) turns into the most vicious vacuum cleaner in the world and sucks up everything in its path.

$\endgroup$
  • 2
    $\begingroup$ The "in front of the wing" vs "below the wing" design in the 737 -300 and onwards is also in contrast to the "below the wing" design of the A-320 series, which use the same motor but need a longer landing gear to accommodate the way the engine is mounted. $\endgroup$ – Ralph J Jan 4 '18 at 3:48
  • $\begingroup$ Is there any advantage of having a shorter landing gear as in Boeing in comparison to the Airbus planes of similar size..?.. $\endgroup$ – Srikanth Nov 18 '18 at 5:30

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.