In a pitot-static tube, we have two different pressure, the static pressure $p_s$ and the total pressure $p_0 = p_s + \frac{1}{2}\rho v^2$, which comes from the Beroulli equation for incompressible flows.

Now, lets say we are given an inflow of air from the freestream (assume STP conditions) with a speed of $v_{\infty} = 100$ ft/s. The total pressure would just be $p_0 = p_{\infty} + \frac{1}{2} \rho v_{\infty}^2$, but what I fail to understand is how we would get the static pressure. Would it just be the freestream pressure? Or something else...


The pitot tube is pointed into the airstream and measures the total pressure. Static pressure must be measured, not calculated. It is done so at a separate location, using a static port.


Both pitot tubes and static ports are needed in order to derive air speed, as this incident sadly illustrates.

| improve this answer | |
  • $\begingroup$ Some pitots also have a static probe, they are known as pitot-static probes. Examples. $\endgroup$ – mins Oct 25 '17 at 22:43
  • $\begingroup$ So there is no mathematic expression for it? $\endgroup$ – Josh Pilipovsky Oct 25 '17 at 23:24
  • $\begingroup$ No not really, pressure is just the average impact energy of the Brownian motion of air molecules, a statistical entity rather than a mathematical expression. It needs to be measured, not derived. $\endgroup$ – Koyovis Oct 25 '17 at 23:31
  • $\begingroup$ @mins Yes static pressure can be measured at the pitot tube as well, as long as a location is chosen that is relatively insensitive to air stream velocity. $\endgroup$ – Koyovis Oct 26 '17 at 0:17
  • 1
    $\begingroup$ @Trevor Both the static ports and the pitot tube are not insensitive to how the airflow shapes over the aircraft, no matter where they are located. During certification of the aircraft, a separate pitot tube with wings is dragged behind and below the aircraft, in order to take measurements out of the flow field of the aircraft. Data from the drone tube are then compared with the pitot/static ports installed on the aircraft, and used to calibrate the installed instruments. As to sideslip, there are static tubes on both sides of the cockpit - average indication is calibrated as well. $\endgroup$ – Koyovis Oct 26 '17 at 13:38

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.