10
$\begingroup$

Runways are generally labeled by their magnetic azimuth between 01 and 36. This means that runways are normally labeled on each end with a number that is reciprocal to the other by 180 degrees.

Do any runways exist where the approach ends aren't labeled reciprocally to each other?

$\endgroup$
  • $\begingroup$ "Magnetic variation, however, can have a considerable impact near the poles." but it is of course the same at both ends, unless you want to count thousandths of one degree ;). I'm not sure what you are asking since, as runways are straight, one end must be 180 degrees opposed to the other. $\endgroup$ – Simon Jul 27 '16 at 21:50
  • 5
    $\begingroup$ @Simon If you have a runway crossing the North pole, you would have to number both ends with 36 don't you? ;-) $\endgroup$ – DeltaLima Jul 27 '16 at 21:54
  • 2
    $\begingroup$ On this question there are some examples of runways that are only labeled at one end $\endgroup$ – TomMcW Jul 28 '16 at 0:43
  • 2
    $\begingroup$ "The pole" isn't an exact point, and there is a very large area of "magnetic unreliability" where you could have just about any reading.... $\endgroup$ – Lnafziger Jul 28 '16 at 3:14
  • 2
    $\begingroup$ does this count? endlessrunway-project.eu $\endgroup$ – Federico Jul 28 '16 at 9:04
18
$\begingroup$

Elk City, ID has runway 14/35 with about 30 degrees between reciprocal approach paths: photo of S90

$\endgroup$
  • $\begingroup$ Elk City was the first one that popped into my head too! Of course, the physical runway surface is not actually labelled. Fun strip! $\endgroup$ – J Walters Jul 29 '16 at 10:18
-2
$\begingroup$

No, but at airports with multiple, parallel runways they will use an adjacent runway heading.

Example: KATL, Hartsfield Jackson Intl, in Atlanta, GA, which has five east-west parallel runways designates them Runways 8L-26R, 8R-26L, 9L-27R, 9R-27R, and 10-28.

$\endgroup$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.