11
$\begingroup$

RNAV 25 KOEB

Let's say that we're directly west of CATLI and have been cleared direct CATLI for the RNAV approach. We load the approach into the GNS430 and proceed direct the fix.

After crossing CATLI outbound for the hold-in-lieu-of-procedure-turn, we realize that we want to stay in the hold for a few more turns. How do I tell the 430 that I don't want it to sequence to ZAMGI upon arrival at CATLI?

Improve this question
$\endgroup$

1 Answer 1

Reset to default
6
$\begingroup$

Press the OBS button to put waypoint sequencing into suspend, as indicated by the green "SUSP" appearing over the OBS button.

Improve this answer
$\endgroup$
2
  • $\begingroup$ Knew it was something simple. $\endgroup$
    – Steve V.
    Mar 5, 2014 at 4:29
  • $\begingroup$ Yep. The OBS button acts as suspend button: -in holds -on the leg between FAF and MAP -if on the "from" side of the leg to the IAF, if vectors-to-final is activated. $\endgroup$
    – Philipp
    Mar 5, 2014 at 21:43

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .