# Where can I get the FAA data that defines airspace, including MOAs etc.?

I was looking at http://www.gelib.com/aeronautical-charts-united-states.htm, where you can download shape files for Google Earth that show US airspaces. I'm writing some software that has a similar need and need to find a source for this data. I'm looking for data that defines the extents of airspaces including MOAs, restricted areas, etc.

I have been pouring through the FAA's website with no luck. The link I referenced above says its source was the National Aeronautical Charting Office (NACO), which I'm having very little luck finding as well. I think it may have been renamed, thus the poor results. I also called the FAA and can't seem to find anyone there that knows where to transfer me.

So, does anyone here have any helpful pointers on finding said information? I want to pull it directly from the source to make sure it is always up-to-date and accurate.

• I hope you are making an open-source data card that would free people from the grip of Jepp updates. Jan 22 '14 at 22:41
• can you actually download shape files from the gelib.com URL you gave? I've tried, and don't see anything in GoogleEarth. Jan 23 '14 at 15:09
• No. I was able to download some shape files from the link 2NinerRomeo provided in his answer below but they appear to be 2 dimensional shape files. I'm still looking into that because I don't have much experience working with shape files... maybe they are 3d and I just haven't found the "magic button" in the viewer yet. Jan 23 '14 at 15:32
• Yeah, I don't think it works.... but I'm looking at some of the data from the other sources, and I'm going to try to change it into GoogleEarth KML files. If I'm successful, I'll followup here. Jan 23 '14 at 15:51
• @mins: Sure enough. I've deleted the comment. Sep 11 '16 at 16:13

Take a look at the National Flight Data Center. The data appears to be contained in NASR. I mentioned in my comment that there may be no official source for spatial data, but I think this may include what you are looking for.

These are derived products. The cannonical definitions are the legal descriptions found in FAA Orders with the prefix 7400. At the time of this writing, JO 7400.11 (current version E) covered airspace classes A,B,C,D and E as well as reporting points. The JO 7400.10 (current version C) covered special use airspaces. Both publications can be found at the FAA's Website.

• Found some good stuff here, thanks. My initial opinion is that the airspace files won't suit my needs but there was a lot of other good information there that I needed as well. Appreciate the link. Jan 23 '14 at 15:34
• Are the 2D shapefiles the canonical master definitions or derived products? For Class C airspace, for example, does the FAA maintain exact definitions of a cylinder with a given center, radius, and altitude within one or more radarcs having a certain center, inner and outer radii, start and stop radials, etc.? Nov 25 '15 at 17:42
• I would call these derived products. The cannonical definitions would be the legal descriptions found in FAA Orders with the prefix 7400. At the time of this comment, order 7400.9Z covered Classes A,B,C,D,E as well as reporting points. 7400.8X covered special use airspaces., Both can be found here: faa.gov/air_traffic/publications/#orders 7400.9Z superseded 7400.9Y. These are published yearly. I'm not sure what will come after .9Z. Dec 3 '15 at 0:06

You are looking for Aeronautical Navigation Products (AeroNav Products) (formerly NACO).

They have a number of digital products, which should have the data that you are looking for.

If not, their contact information is:

Customer Service: (800) 626-3677
9-AMC-Aerochart@faa.gov

Abigail "Abby" Smith, Director
FAA, AeroNav Products AJV-3
1305 East-West Hwy
Silver Spring, MD 20910
(301) 427-5000

• Thanks, I have left a message with them and will post a comment here if I get any good information from them. Jan 23 '14 at 15:33

You may take a look at openAIP. It contains nearly up-to-date airspace and airport information besides other aviation topics. Airspace data is available for download as .aip file. This is actually a very simple XML file that can easily be used in any application.

• OpenAIP is a pretty cool project, but they describe it as a "crowd-sourced aeronautical information platform that allows registered users to add, edit and download aeronautical data" -- that strikes me as having a big red NOT FOR NAVIGATION - USE OFFICIAL CHARTS FOR FLIGHT stamp on it :-) Jan 26 '14 at 7:36
• Or take a look at Open Flightmaps, map and raw data as OFMX (a slight variation of AIXM 4.5) as well as a few other formats available. Mar 23 '20 at 16:07